A normal wood fire burns a few hundred degrees at the flue. An ignited creosote layer can push past 2,000°F, hot enough to crack clay tiles like dropped ceramics, warp metal liners, and cook mortar joints into powder. The fire ends in minutes; the map-making is what protects you afterwards.
How we map fire damage, in escalating depth
- Exterior and firebox exam. Heat signatures, spalled brick at the top of the stack, damaged cap and crown, the fire’s exit wounds.
- Full camera scan. Thermal cracking has a signature the scan reads clearly: vertical fractures through multiple tiles, often with a glazed creosote residue that marks how hot it ran. This is mandatory, Level 2 minimum, after any suspected chimney fire.
- Escalation when warranted. If the scan shows heat likely escaped the flue, through cracked tiles adjacent to framing, or a damaged smoke chamber, a Level 3 opens the concealed side to check whether wood framing was scorched. Charred framing that survives the fire is a structure fire on a delay timer.
The repair paths, by damage tier
And the cause gets fixed too
The fire had fuel, creosote that accumulated past the danger line. Once repairs are done, the prevention plan is boring and effective: annual inspection, cleaning when buildup warrants, on a schedule someone else remembers for you. One chimney fire per lifetime is the right quota. Get the mapping started.
