Most chimney hazards are probabilistic, water gets in eventually, mortar erodes eventually. Glaze is different: it’s a loaded condition. A flue coated in stage-3 creosote is holding concentrated fuel a single hot ember can light, and when it lights, it burns hot enough to crack the liner protecting your house.
How glaze forms
Layered creosote insulates itself, so deep deposits stay warm, partially remelt during hot fires, flow, and re-harden into a dense, glassy coating. The recipe is always some mix of: years without cleaning, chronically wet wood, and long smoldering burns. By the time it’s glaze, it’s often thick, and because it’s smooth and shiny, homeowners peeking up the damper sometimes read it as “clean”. It is the opposite of clean.
Why sweeping can’t touch it
Brushes remove particulate deposits, things that are on the wall. Glaze is chemically bonded to the wall, mechanically it behaves like enamel. Standard sweeping polishes it. Removal requires breaking the bond first:
That’s the deep cleaning service in a nutshell, a different job from a sweep, with different tools and timeline.
After removal: break the recipe
Glaze that formed once will form again under the same habits. The fix is boring and proven: dry wood, hot fires, the full habit set, and an annual schedule so deposits never again get years to cook. Start with the assessment, if it’s truly glaze, you’ll see it in the photos yourself.
